TrueSun Medical: Medscope - TS1211 TENS unit, Electrotherapy

Medscope:
The Medscope TENS 1211 - is a dual channel device with five modes of operation. An LCD provides easy set-up and accurate operation. Includes patient compliance timer, and a treatment timer
Technical Specifications:
Channels:	Dual Channels, Isolated between channel
Output:	Two independent output terminals.
Wave Form:	Asymmetric biphasic square pulse
Amplitude:	0 to 40 volts
Pulse Width:	50 to 300 microseconds, adjustable.
Frequency:	2 to 150 Hz, adjustable.
Charge per Pulse:	80mA x 250 microseconds (500 ohm test load).
Maximum Current:	TBD
Maximum Voltage:	0 to 80 volts.
Maximum Charge:	20 microcoulombs per pulse maximum, positive pulse and negative pulse seperate.
Modes:	1.Burst Mode: 7 pulses per burst / 2 bursts per second / 100 Hz internal frequency of burst 2.Normal 3.MRW: Pulse rate and pulse width show alternating periodic change 4.SD: Pulse rate and pulse width show alternating periodic change 5.Bi-Pulse: Channel 1 fixed output pulse rate at 100Hz, Channel 2 fixed output pulse rate at 4Hz. Continuously output for 1 second and then stop output for 1 second, complete cycle at period 2 sec
Low battery:	Indicator illuminate when the power supply voltage falls below 6.5 volts.
Timer:	1 to 90 Minutes & a patient compliance timer
Power Source:	9V DC square shape battery
Load:	TBD
Size:	59x23.7x101 mm
Accesory:	Plastic belt clip.
Weight:	124 grams (including battery).
Package:	(1) Controller unit (2) 9v battery (3) instructional manual (4) Lead wires (5) self-adhesive electrodes (6) carrying case.

Product Detail